HD Network Camera Dedicated Gigabit 1 Fiber Optical 16 Electrical
SFP Module Transceiver
Adaptive Gigabit Ethernet fiber switch with 16 electrical ports and
1 Gigabit SC optical port, which can provide point-to-point and
point-to-multipoint chain multi-node network structure, and the
network is very flexible, which can transfer the network
transmission distance From 100m to 120m of twisted pair to 100Km of
optical fiber, each node can also provide one or more RJ45
interfaces to connect directly to 1080P HD network cameras
according to the specific needs of users. This product is small and
compact, using the American industrial Marvel 88E6095IC, desktop
design, flexible networking, suitable for use in chain entrance
multi-point networks such as vehicle monitoring, highway network
system, mine monitoring system and so on.
Features:
1. Supports 10/100/1000Base-T, 1000Base-X protocol.
2. Flow control for full duplex and half duplex.
3. Supports up to 10k byte JUMBO frame.
4. Supports Fiber Port Trunking, Increasing Fiber Channel Bandwidth
and Supply Fiber Channel Redundancy.
5. Supports Ports Based VLANS and TAG Based VLANS.
6. In conformity to safety code of FCC and CE MARK.
7. Connector: Multi-UTP RJ-45connector, one or two fiber connector
8. Operation mode: full duplex mode or half duplex mode
9. Power supply parameter: DC 5V 1A/2A
10. Environmental temperature: 0-50℃
11. Relative humidity: 5%-90%
12. UTP cable: Cat5 UTP cable
13. Transfer fiber: multimode(50/125, 62.5/125 or 100/140um);
single mod( 8.3/125,8.7/125, 9/125 or 10/125um).
Main performance:
◆ 16 10 / 100M-RJ45 ports and 1 1000M optical port
◆ Use store and forward (STORE AND FORWARD) exchange method to
ensure data integrity
◆ Compliant with IEEE802.3X flow control in full duplex mode and
back pressure flow control in half duplex mode
◆ 10 / 100M dual-speed adaptive, the maximum transmission rate is
1000Mbps (full duplex mode)
◆ Support MAC address self-learning
◆ Support MDI / MDI-X port auto flip
◆ Built-in large-capacity independent send and receive FIFO buffer,
support FIFO, prevent data packet loss
◆ Dynamic LED indicator provides simple working status prompts and
troubleshooting
◆ Port-based VLAN function (optional)
Technical Specifications:
◆ Suitable standards: IEEE802.3 / u / z / ab, 10Base-T, 100Base-TX,
1000Base-T and 1000Base-SX / LX
◆ MAC address table: 1K
◆ Cache: 1MKb
◆ Backplane bandwidth: 12G, can achieve non-blocking wire-speed
forwarding
◆ Interface standard: electrical port: RJ-45, 10 / 100Mbps
(adaptive);
Optical port: 1000Mbps;
◆ Cable: twisted pair: Category 5E or Category 6 (the longest
distance is up to 100 meters)
Cable Connection of 10/100/1000M Series Gigabit Converter
| Port type | Cable Type | Max.Length |
| 10/100/1000BASE-T | Cat. 5, 5E UTP, RJ-45 | 100 meters |
| 1000BASE-SX | Multi-mode Fiber of 850n (62.5/125µm) | 220 meters |
| 1000BASE-SX | Multi-mode Fiber of 850nm (50/125µm) | 550meter |
| 1000BASE-LX | Single-mode Fiber of 1310nm(9/125um) | 10-100km |
LED Indication
Please refer to the following table for LED indication of
10/100/1000M Series Gigabit Converter
| LED | Status | Indication |
| power | ON | The Power is on |
| lnk/act | Flash | F1:FX Data,P1 and P2:TP Data |
| speed | ON | The Speed is 1000M |
Specifications of 10/100/1000M Series Gigabit Converter
| MODEL | 1,10/100/1000M Series | 2,10/100/1000M Series |
| STANDARD | IEEE802.3ab 1000BASE-T; | IEEE802.3ab 1000BASE-T; |
IEEE802.3z 1000BASE-SX | IEEE802.3z 1000BASE-LX |
| INTERFACE | RJ-45 part x 1 (10/100/1000 Mbps) SC connector Fiber port x 1 (1000 Mbps) |
TP CONNECTIONS | 10/100/1000BASE-T:UTP Category 5, 5E |
FIBER CONNECTIONS | 1000BASE-SX:62.5/125µm or 50/125µm Multi-mode fiber, SC/FC connector | 1000BASE-LX:9 or 10/125µm Single-mode fiber ,SC/FC connector |
LED INDICATIONS | lnk/act,speed,power |
| MAX.DISTANCE | 550m/220m | 10km and 20km,100km |
| ENVIRONMENT | Operating Temp:0~+70℃ Storage Temp:-40~+85℃ Humlblty:10~90% non-condensing |
| POWER | 5V 2A |
| NET WELGHT | 500 g |
| EMISSION | FCC Class A, CE |
Typical Optical Power Budget
| 10/100/1000M Series |
| Connector | SC | SC | SC | SC | SC |
| Wavelength | 850nm | 1310nm | 1310nm | 1310nm | 1550nm |
| Typical | 550m/220m | 10Km | 20Km | 30Km | 50-100Km |
| Min TX | -11dBm | -11.0dBm | -10.0dBm | -7.0dBm | -1～-6.0dBm |
Max TX PWR | -3.0dBm | - 3.0dBm | -1.0dBm | 0.0dBm | 0.0dBm |
| Sensitivity | -18dBm | -21.0dBm | -21.0dBm | -24.0dBm | -24.0dBm |
Link Budget | 8.5dB | 12.0dB | 15.0dB | 19.0dB | 19.0dB |
Installation
a. Turn off the power of the device/station in the network in which
the media converter will be installed.
b. Ensure that there is no activity in the network.
c. Attach fiber cable from the media converter to the fiber
network. The fiber connections must be Matched-Transmit socket to
receive socket
d. Attach a UTP cable from the 1000Base-Tx network to the RJ-45
port on the product
e. Connect the power cord to the media converter and check if the
power LED lights up. The TP Link and FX link LED will light when
all the cable connections are satisfactory.
f. Turn on the power of the device/station.
Packing & Delivery
The package will be packed according to standard export
requirements, customer satisfication is our target.
Label printing : Customer logo or kexint brand are available
Inner packing: 5pcs in one carton
Outer packing: the carton will be packed with sack, well protect
carton from dust and wet.
The transportation: By air ,by sea ,by DHL ,Fedex TNT ,UPS ...
a).Lead time
With more than 200 employees in my company,at least 10,000
connectors can be produced.
b).Research Department
With our separate research team,so we are albe to have products
made according to your requirements.
c).Qulity assurance
Every product will be tested to be of good quality.Meanwhile free
samples can be supplied for your test.
The guarantee period is 10 years.So if there are problems with the
goods,replacement will be available.
