2U SC LC Rack Fiber Optic Patch Panel 48 96 Port 19 U Sliding Type
Transparent Top
It is 19’’ sliding type, with transparent top & front cover, easy
for observation after installation. Its distribution center holds
fusion splice trays for fiber splicing, distribution and protection
in communication room or existing equipment rack.It is used for optical fiber terminal fiber fusion, adjustment of
optical connectors, storage of redundant pigtails, and protection
of optical cables. It is useful for the safe operation and flexible
use of optical fiber communication networks This plays an important
role.
1 Application:
1. Telecommunications subscriber loop
2. Fiber to the home (FTTH)
4. LAN/WAN
5. CATV
2 Structural Features:
1. Standard size, light weight and reasonable structure
2. Front transparent cover and top transparent cover for easy
observation
3. Different adapter panel available FC, LC, SC, ST ...
4. Front access panel design for easy operation
5. Suitable for 19’’ standard optic distribution Cabinets
6. Left side 2 cable port φ20mm; right side 2 cable port φ48mm
3. Main technical Specifications:
| 1 | Dimension(mm) | 430x311.3x89 |
| 2 | Weight | 3.9 kg |
| 3 | optical fiber winding radius | ≥40mm |
| 4 | extra loss of fiber tray | none |
| 5 | fiber length left in tray | ≥1.6m |
| 6 | fiber capacity | 96 cores |
| 7 | working temperature | -400C ~ + 600C |
| 8 | lateral pressure-resistance | 500N |
| 9 | shock-resistance | 750N |
| 10 | Material | Aluminum |
| 12 | Max capacity | 48 SC or 96 LC |
| 14 | Thickness | 1.2mm |
4. The role of optical fiber distribution frame
The connection of optical fiber distribution frame as the terminal
equipment of optical cable line has the following basic functions
① Welding function
When fusion splicing, pigtails need to be spliced out. The fiber
tray can coil and arrange the excess pigtails to protect the
splice.
②Fixed function
After the optical fiber cable enters the rack, its outer jacket and
reinforcing core can be connected and fixed.
③ deployment function
The connector on the tail cable is plugged into the adapter, and
the other end of the adapter is connected to the optical path. The
adapter and the connector can be flexibly inserted and docked, and
the configuration can be tested freely.
5. Classification of optical fiber distribution frames
Optical fiber distribution frame is mainly divided into 12-port
fiber distribution frame, 24-port fiber distribution frame, 48-port
fiber distribution frame, 72-port fiber distribution frame, 96-port
fiber distribution frame, 144-port fiber distribution frame.
The optical fiber distribution frame mainly plays the functions of
welding, fixing, and deployment in the optical network
transmission. The optical fiber distribution frame can be divided
into 12 ports, 24 ports, 48 ports, 72 ports, 96 ports and other
types. Determine the number of fusion splicing cores, and then
select the appropriate fiber distribution frame.
6. Operations:
1. Peel the cable , take off the outer and inner housing, as well
as loose contract tube, and wash off the filling grease, leaving
1.1～1.6m fiber and 20～40mm steel core.
2. Fix the cable-pressing card and the cable, as well as the cable
reinforce steel core.
3. Lead the fiber into the melting and connecting tray, fix heat
contract tube and melted tube to one of the connecting fiber. After
melting and connecting the fiber, move heat contract tube and
melted tube and fix the stainless (or quartz) reinforce core stick
,make sure the connecting point is in the middle of the housing
pipe. Heat the pipe to make the two into one.Put the protected
joint into the fiber-laying tray.(one tray can lay 12 cores)
4. Lay the left fiber in the melting and connecting tray evenly,
and fix the winding fiber with nylon ties. Use the trays from the
bottom up. After all the fiber has been connected, cover the top
layer and fix it.
5. Position it and use the earth wire in accordance with the
project plan.
7. Packing List:
1. terminal case main body: 1 piece
2. polishing sand cloth: 1 pcs
3. melting and connecting mark: 1 pcs
4. heat shrinkable sleeve: 2～24 pcs
5. tie: 4～24 pcs
8. Our advantages:
a. Good reply: Your inquiry related to our products or price will
be replied within 24 hours.
b. OEM&ODM: We can help you to design or put your logo and
company name into products.
c. Remote Technical support&Full Technical Document
d. Warranty: 1 year warranty( While the warranty is not responsible
for those broken by violence or updated with other brands.)
e. English software, English Indicator
f. Professional, Very competitive price
g. Large Stock, Fast Delivery
