High Speed Copper Lan Network Cable Common Computer Cat6 FTP UTP
STP 4 Pair 0.565 LSZH
CAT6e F/UTP Single-core bare copper with a specification of 23 AWG
was used as the conductor, and the polyethylene polymer material
was used as the insulator. The sheath material was made of
flame-retardant polymer material and the color was gray. The
requirements of the specification (ISO / IEC), the electrical
characteristics exceed the requirements of the CAT6 international
specification, the cable center cross isolation guarantees NEXT
performance and a reasonable construction bending radius. LSZH:
stands for "low smoke and halogen free". Low-smoke halogen-free
materials can meet the requirements of safety and environmental
protection.
1.The performance is better than the six standards of
ISO11801-2002, TIA / EIA568C.2 and GB50311-2007
2. Has backward compatibility, can be backward compatible with
CAT5e and lower systems, avoiding user investment loss
3. Low transmission delay, compact cable design, reducing twisting
and knotting of cables during installation
4.The central PE cross skeleton guarantees that the twisted-pair
twisted-pair distance will not be damaged during the installation
to the greatest extent. It has high electromagnetic interference
resistance and minimizes the bit error rate of the transmitted
signal.
5. Built-in tearing rope for easy construction
6. The outer jacket of the cable is printed with the trademark,
cable number, cable category, wire gauge, fire rating, standard,
meter mark, batch number
7. Packed in carton with inner shaft and outer box with certificate
of compliance
8. The production process of insulated single wire adopts online
control eccentric instrument, online spark detector, online water
capacitance detector and other online equipment to ensure the high
reliability and consistency of the product. The insulated single
wire uses color bars to meet environmental protection requirements.
9. All materials using copper, PE and PVC have been tested and
analyzed. The content of radioactive and harmful heavy metals is
completely controlled within the strict international standards.
10. The insulation layer is made of high-density polyethylene
(HDPE)
11. Outer sheath material can choose different flame retardant
grade materials
12. Passed the third-party authority inspection and obtained UL
certification
Application:
1. Ethernet, 10 Base-T, 100 Base-T4, ATM, TP-PMD Seppch, Telephone,
Multimedia, Trunk Wiring
2. Cable Construction:
3. Conductor Dimension: 1/0.5+-0.01mm)
4. Material:Pure Copper
5. No. Of Pairs: 4 with ripcord
6. Type of Jacket: new PVC/PE
Mechanical Properties:
1. Conductor insulation material: halogen free Foam/Skin material
2. Cable jacket material: halogen-free, flame-retardant material
3. Application area: dray as well as humid rooms
4. Temperature (moved): 0°C to 50°C
5. Operating temperature: -20°C to +60°C
6. Min. bending radius for one-time bending: 4×O.D.
7. Min. bending radius during installation: 8×O.D.
F/UTP Cat 6e(lndoor)
| Anti-Crosstalk Divider | LDPE:4.5*0.3 |
| cable Shield(Aluminum Foil) | Tick:0.060mm,Extent:25mm |
| ESD Drain Wire | 0.5TC |
| Ni Ion Rip cord | 150D |
| Max.capacitance unbalance(pF/100m) | ≤330pF/100M(Per TIA/EIA-568B.2) |
| ≤60pF/100{Per IEC 61156} |
| Nominal Velocity of Propagation | 69% |
| Max.Delay Skew(ns/100m} | ≤45ns/100m |
| Max.Conductor DC Resistance20Deg.c | 9.38Ω/100M (24AWG) |
| Max.DC Resistance unbalance 20 Deg.C | ≤5% (perTIA/EIA-568B.2) |
| ≤2% (per IEC 61156) |
| Characteristic lmpedance(O) 4"1.00MHz | 100±15 |
| Operating Temp.Range | -20~70℃ |
| Max.Recommended Pulling Tension | 110N |
| Min.Bend Radius(lnstall) | 8xO.D. |
| Flame Test | CM |
1. We have a professional production team.
2. Ability to meet customer OEM needs
3. We passed the ISO9001 certification system
4. Our customers are widely distributed, including the United
States, Brazil, Russia, Spain, South Africa, Australia ...
