Wall Mounting Holding Pole 8 Core/12 Core Fiber Optic Distribution
White Black Light Gray
Description:
FTTH fiber optical terminal box, outdoor fiber optic termination
box is used in wiring connection between optical cable and optical
communication equipment, through adapter in distribution box,
optical fiber jumper leads optical signal, realize optical wiring
function, and can meet the optical splitter placed to achieve
spectral function.
Features:
1, Total enclosed structure
2,
Material:PC+ABS,wet-proof,waterproof,dust-proof,anti-aging,protection
level up to IP65.
3, Clamping for feeder cable and drop cable ,fiber
splicing,flxation,storage,distribution···etc,all in one.
4, Cable,pigtail,patch cords are running through own path without
disturbing each other,cassette type SC/FC/PLC adaptor installation
5, Distribution panel can be flipped up,feeder cable can be placed
in a cup-joint way,easy for maintenance and installation.
6, Cabinet can be installed by the way of wall-mounted,suitable for
both indoor and outdoor uses.
Specification:
1,Environmental requirement
Working temperature:-40℃～+85℃
Relative humidity:≤85%(+30℃)
Atmospheric pressure:70KPa～106Kpa
2,Main technical datasheet
Insertion loss:≤0.2dB
UPC return loss:≥50dB
APC return loss:≥60dB
Life of insertion and extraction:＞1000 times
3,Thunder-proof technical datasheet
The grounding device is isolated with the cabinet, isolation
resistance is less than 2×104 MΩ/500V(DC)；
IR≥2×104 MΩ/500V
The withstand voltage between grounding device and cabinet is no
less than 3000V(DC)/min, no puncture,no flashover；U≥3000V
Configuration table:
Table 1 Model and configuration
| Model | Description | Size(Pic 1)A*B*C(mm) | Max Capacity | Installation Size(Pic 2) D*E (mm) | Into the largest cable diameter (mm) | Cable outlet size (mm) |
| KXT-8B-1 | Distribution Box | 250*190*72 | 8 | 130*82 | 16 | 2~4.6 |
| KXT-16A/B | Distribution Box | 293*219*84 | 16 | 155*82 | 16 | 2~4.6 |
Site installation:
Installation:
1．Wall-mounted installation
Drill 4 holes over the wall based on the size in table 1,place the
expansion bolt Φ7.5*40,place the box to match up the holes and use
bolt to fasten.(Pic 6)
2．Pole-mounted installation
Fix 1 set of the easy pole ring to the telecom pole .
Accessories:
1. Users' Manual*1.
2. Key*1.
3. Accessories Bag * 1
5. Easy pole ring*2,M6*20mm Bolt*2(Option)
